Is Virtual Center 4.1 Supported on Windows Server 2008 R2?
KB ID 0000379 Problem ES! it is, if in doubt see the compatibility matrix. But you have tried to install it and seen an error? Error: This product can only be installed on the following 64-bit operating systems: Windows XP SP2 or above Windows Server 2003 Windows Server 2008 Solution Essentially this just a bad error message that bears no resemblance the the actual problem! The REAL REASON you are seeing this error is because you re...
Using Openfiler and vSphere ESX / ESXi 5
KB ID 0000380 Problem Openfiler is a free NAS / SAN prebuilt Linux distribution, that can provide iSCSI storage to your VMware environment, it’s ideal for small setups (This video was made with all the devices running in VMware workstation 7, on my laptop. That’s two ESXi servers, a vCenter server, and the Openfiler iSCSI target server). Solution Related Articles, References, Credits, or External Links Openfiler Thanks to...
Resizing Windows Volumes / Drives in VMware vSphere / ESX
KB ID 0000381 Problem This article is primarily geared towards making your guest virtual machines hard drives LARGER, If you want to SHRINK or make the drive smaller then see the following article. Resizing Guest Hard Drives using the VMware Converter Solution Re sizing a Guests Hard Drive (Make it larger) 1. On the properties of the VM select the hard disk in question and locate its size. 2. Enter the new size and hit OK. Note:...
VMware – Ubuntu Screen Resolution Problem
KB ID 0000411 Problem I have a guest VM on my vSphere test rig that’s running Ubuntu 10.10. That I use for testing, for a while I could not get the screen resolution above 854×480 (For wide screen or 16:9 format). Solution Note I’m assuming you already have the VMware tools installed! 1. Shut down your guest machine, open the VMware VI client and go to the settings of the guest machine. go the the hardware tab...
VMware – Datastore Browser shows “Searching Datastore….”
KB ID 0000401 Problem I did a VMware VI3 to vSphere (4.1 U1) upgrade today. While bringing all the guest machines across, suddenly I could no longer browse the datastore, I only had one more guest to “Add to the inventory”, and all the mission critical machines were already migrated. I tried rebooting the virtual center, I tried restarting the ESXi host machines, still it sat saying “Searching...
Possible bug in VMware Client
KB ID 0000413 Problem Unable to use multiple console sessions in Windows 7. 1. Seen on Windows 7 x64 Ultimate, with and without aero enabled, on two separate machines. 2. Happens if connected to VCenter OR directly to ESXi (build 4.1.0, 260247) 3. Does NOT happen with the same software from Server 2003. (Same systems, same vesion of the VI client). 4. Does NOT happen on Server 2008 R2 Standard x64 (Same systems, same version of the VI...
vSphere – Guest VM is shown as (Orphaned)
KB ID 0000414 Problem I’ve seen this happen a few times now, while looking at your Virtual infrastructure, one or more client machines is greyed out and shown as (Orphaned). Solution If you have many guests VM’s on one host with this problem, you can cure this by removing the parent host and re-adding it to the cluster, then right clicking it and select “Reconfigure for HA”. Or you can do the following, on a...
Enabling Tape Drives on vSphere Hosts
KB ID 0000417 Problem Over the next few weeks I’ve got a couple of Hewlett Packard LTO Ultrium 5 Tape drives to deploy with ESXi 4.1 U1. These will work just fine, there is however a problem presenting SCSI U320 drives now, so thanks to my colleague (Andrew Dorrian) for giving me the heads up on the problems I would face with older drives. Make sure you have enabled SSH access on your ESX Host. Note: With the release of vSphere...
VMware error on HP Proliant “Host Baseboard Management Controller status”
KB ID 0000418 Problem Saw this today on a HP Proliant DL380 G7 Server. Solution 1. It’s a simple one to solve, the server was built with the HP ESXi build, and the management agents are complaining because the iLO is not connected to the network. 2. When you connect the iLO socket to the network the alarm should change as shown below. 3. Once you have connected or disabled it you can reset the alarm. 4. Take the opportunity to...
VMware VIM (vCenter) Where to put the sysprep files in Server 2008?
KB ID 0000420 Problem For newer servers I don’t really use templates anymore, but if you are deploying a lot of 2003 Windows servers in vSphere, then they can save you some time. Back in the days of vCenter 2.5 you just uploaded those sysprep files to the relevant folder in, C:Documents and SettingsAll UsersApplication DataVmwareVmware Virtual Centersysprep But that location no longer exists (since Server 2008). Solution The...