Event ID 1206 and 1204
KB ID 0000125 Problem Event 1206 and 1204 Solution Drive Array Accelerator Battery Failed. The array accelerator board attached to the array controller in Slot 3 is reporting a battery failure. and / or Drive Array Accelerator Status Change. The array accelerator board attached to the array controller in Slot 3 has a new status of 4. (Accelerator status values: 1=other, 2=notConfigured, 3=enabled, 4=tmpDisabled, 5=permDisabled) The...
Event ID 1202
KB ID 0000124 Problem Security policies were propagated with warning. 0x4b8 : An extended error has occurred. Solution In my case, driver signing policies. Enable Logging 1. Enable debug logging for the Security Configuration client-side extension. To do this: a. Start Registry Editor. b. Locate and then click the following registry subway: HKEY_LOCAL_MACHINESoftwareMicrosoftWindows...
Event ID 1202
KB ID 0000123 Problem Security policies are propagated with warning. 0x5 : Access is denied. Please look for more details in Troubleshooting section in Security Help. This error typically occurs when the system has not been granted the correct permissions to update the access control list of a service. This may occur if the Administrator defines permissions for a service in a policy but does not grant the System account Full Control...
Event ID 1111
KB ID 0000122 Problem 1111 Driver <name> required for printer <name> is unknown. Contact the administrator to install the driver before you log in again. Solution On your RDP connection, you have enabled the local printers so the server is attempting to map that printer. Therefore, you can print locally from within the RDP session. The server does not have that printer driver installed henceforth the error. You need either...
Event ID 1056
KB ID 0000121 Problem The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service. This is not a recommended security configuration. Credentials for Dynamic DNS registrations may be configured using the command line “netsh dhcp server set dnscredentials” or via the DHCP Administrative tool. Solution You need to reset the...
Event ID 1030 and 1058
Event ID 1030 KB ID 0000119 Problem Event ID 1030 and 1058, Windows cannot query for the list of Group Policy objects. A message that describes the reason for this was previously logged by the policy engine. and Windows cannot access the file gpt.ini for GPO CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=<domain name>,DC=com. The file must be present at the location <<domain name>sysvol<domain...
Event ID 1054
KB ID 0000120 Problem Windows cannot obtain the domain controller name for your computer network. (An unexpected network error occurred. ). Group Policy processing aborted. Solution By default, when a client machine (XP or W2K) attempts to connect to a DC to retrieve group policy information, it first sends a series of ICMP pings to the DC in order to test connectivity and link speed. If the ping response takes longer than a certain...
Event ID 1026
KB ID 0000118 Problem “Windows Cannot load extensible counter DLL MSSQLSERVER in the first data section.” Solution Locate every instance of the following file sqlctr80.dll (its usually in the binn directory) Right click >properties > security > Grant Everyone Read and Execute. Related Articles, References, Credits, or External Links...
Event ID 1023
KB ID 0000176 Dtd 03/02/10 Problem Event ID 1023 Source : .NET Runtime Description : .net Runtime version 2.0.50727.3603 – Fatal Execution Error (7a09795e) (80131506). Symtoms: 1. As above. seen on .net version 2.0.50727.3603 Note: you version number may be different. 2. Backup Exec Server Service may be stuck / hung in the “starting” state. 3. .net 2 cannot be removed or service packed. Solution 1. Download this, then...
Event ID 1005 and 1015
KB ID 0000117 Problem TraceLevel parameter not located in registry; Default trace level used is 32. SMTP service is installed but not configured. Solution To stop these events from occuring, add the TraceFileName and the TraceLevel values to the following registry subkey: HKEY_LOCAL_MACHINESOFTWAREMicrosoftSNMP_EVENTSEventLogParameters • TraceFileName Type: REG_SZ Value: null (blank) • TraceLevel Type: REG_DWORD Value: 32 (0x20) or...