Cisco Routers – Port Forwarding
Nov17

Cisco Routers – Port Forwarding

KB ID 0000533  Problem If you have a server or host that you want to be publicly addressable and only have one public IP address then port forwarding is what you require. Solution Assumptions 1. You have a public IP on the outside of your Router. 2. You are performing NAT from your internal range of IP address to your External IP address. To Make Sure 1. Run the following command: PetesRouter#show run | include ip nat inside You...

Read More
Cisco Router IOS – Configuring EIGRP
Nov17

Cisco Router IOS – Configuring EIGRP

KB ID 0000929  Problem For the first time in about ten years I had to deal with EIGRP last week, so I thought I would run it up in a lab. Normally I would use GNS3 but for this procedure I’ll use Cisco Packet Tracer.</p< In fact I’ll include the files so you can download and use the lab yourself, (if you have a copy of Packet Tracer). And I’ll also include the configs for all the routers. In the lab I’ve...

Read More
Backup and Restore  Cisco IOS (Switches and Routers)
Nov17

Backup and Restore Cisco IOS (Switches and Routers)

KB ID 0000538  Problem It’s been a long time since I ran through setting up a TFTP server, but I still use 3CDeamon. Below I’ll run though the simple commands to back up, and restore the devices configuration. Solution Backing up a Cisco IOS Device 1. First you have to setup a TFTP server, and know the IP address of the machine it’s on! 2. Connect to the device, either via console cable, Telnet or SSH. 3. Log in >...

Read More
Cisco Router – Password Recovery /Bypass
Nov17

Cisco Router – Password Recovery /Bypass

KB ID 0000931  Problem If you have a Cisco router that you have forgotten the password for, or have been given one, or simply bought one from ebay, you may not know the password. In fact many years ago an ISP was going to charge me a ridiculas amount of money to put an entry in a routers routing table, this procedure ‘ahem’ would have allowed to to do it myself, for free, and then reload the router. Solution The reason you...

Read More
Cisco Router – Configure Site to Site IPSEC VPN
Nov17

Cisco Router – Configure Site to Site IPSEC VPN

KB ID 0000933 Problem I’ve done thousands of firewall VPN’s but not many that terminate on Cisco Routers. It’s been a few years since I did one, and then I think I was a wuss and used the SDM. So when I was asked to do one last week thankfully I had the configs ready to go. I’m going to use the IP addresses above, and my tunnel will use the following settings; Encryption: AES. Hashing: SHA. Diffie Hellman:...

Read More

Cisco IOS – Setup Remote Telnet/SSH Management

KB ID 000093 Problem Having the ability to remotely administer network devices, means I don’t have to get my lazy carcass out of my chair and start fishing console cables out of my bag, also it saves on shoe leather, and travelling time. Solution Cisco Router / Switch – Setup Telnet Access These days people frown at Telnet. It’s an insecure protocol so your password is sent in clear text over the wire, and can be...

Read More