JunOS – Using TACACS+ With Cisco ACS
KB ID 0001040 Problem I’ve been configuring a client’s Juniper SRX chassis cluster, for a while now. Their ACS was deployed last week so my task was to configure it to use the TACACS+ from the Cisco ACS server. The client’s setup required them to use their fxp0 management interfaces to perform the authentication. After it was configured and working, (due in no small part, to the ACS skills of Mr SteveH). I decided...
Juniper SRX – ‘The Routing Subsystem Is Not Running’
KB ID 0001045 Problem While trying to deploy Solarwinds to monitor a Juniper SRX failover cluster, we were having no joy connecting to the management interface of the secondary/standby firewall. The management (fxp0) interface on the primary (node0) firewall we could get to OK. ] After jumping on the secondary firewall (via the console connection) we observed the following; error: the routing subsystem is not running Solution As you...
HP E Series Wireless – Cannot Access Local LAN
KB ID 0000486 Problem You have an HP HP E-Series Mobility E-MSM460, 466 & 430 Access Point, and you cannot access resources on your local LAN (though internet access works fine). This is default “Out of the box” behavior, a lot of consumers want to provide wireless access but DONT want the wireless clients having access to their local servers. That’s fine but what if you do? Solution 1. Log into the web...
Setup and Configure HP Wireless E-MSM720 Wireless Controller with HP E-MSM430 Access Points
KB ID 0000692 Problem We got some ‘demo stock’ in the office this week, I don’t do a lot of wireless, so I thought I would get it setup and have a look to see how easy/difficult it was. Hardware used HP E-MSM720 Premium Mobility Controller (J9694A) HP E-MSM 430 Wireless N Dual Radio Access Point (J9651A) HP HP 2915-8G-P-o-E Switch (J5692A) The switch and controller are ‘tiny’ so if you want to put them...
Manually Configuring HP Wireless (MSM 720 controller) for Public and Private Wireless Networks
KB ID 0000833 Problem In the following procedure I’ll configure the following; HP 5412zl Switch. Cisco ASA 5510 Firewall. HP MSM720 Controller. HP MSM460 and MSM317 Access Points. If you are configuring an MSM765zl or MSM775zl use the following article first. HP MSM765zl and 775zl – Initial Setup and Routing Assumptions Private SSID will be on the normal corporate LAN (In this case 172.16.254.0/24). Public SSID will get...