Deploying Certificates via ‘Auto Enrollment’
KB ID 0000919 Problem SHA CERTIFICATE WARNING: Note This article was written some time ago, ensure your CA environment does NOT use SHA1 for your certificates, if it does, Please visit the following link for migration instructions; Upgrade Your Microsoft PKI Environment to SHA2 (SHA256) I need to setup wireless authentication based on computer certificates, I’ve done similar jobs before by manually issuing certificates for Cisco...
HP MSM Controller – Using RADIUS With Windows Server
KB ID 0000922 Problem I’m very disappointed with HP, theres next to no information on how to do this. My plan was to secure wireless access with certificates, so only clients with a valid digital certificate could authenticate and connect to the wireless. After spending nearly a whole day on the phone to various technical support departments at HP, this remained an impossible requirement! In the end, as the client only had a...
Cisco ISE – Basic 802.1x With WindowsPart Three – Adding Network Devices (Authenticators)
KB ID 0001077 Problem Back in Part Two we configured the specific 802.1x policies in Cisco ISE. Remember with 802.1x it is a three tier system there is a supplicant, (a machine that wants to authenticate), the Authenticator, (the device the supplicant connect to, in our case a switch), and finally an Authentication server (Cisco ISE). Below I will add our switch into ISE, as a RADIUS device and create some groups, and locations for...
Windows Server Setup RADIUS for Cisco ASA 5500 Authentication
KB ID 0000685 Problem Note: The procedure is the same for Server 2016 and 2019 This week I was configuring some 2008 R2 RADIUS authentication, so I thought I’d take a look at how Microsoft have changed the process for 2012. The whole thing was surprisingly painless. I will say that Kerberos Authentication is a LOT easier to configure, but I’ve yet to test that with 2012, (watch this space). Solution Step 1 Configure the...