Dell PowerEdge – PERC RAID Card Importing / Using ‘Foreign’ Disks
KB ID 0000639 Problem I bought some SAS disks from eBay to go in my Power Edge 2900 Server, and scratched my head for a while trying to get the PERC RAID controller to use them. I could only see them marked as ‘Foreign’. Probably because they did not have their original config ‘wiped’ off them before I bought them. Solution 1. Boot the server, Press CTRL+R when prompted, then press ‘C’ to enter the...
Cisco ISE NFR Appliance Setup
KB ID 0001066 Problem The Cisco ISE NFR appliance is for demos and test bench use, I’m currently building a test lab for ISE so I spun a copy up. I looked at the associated ReadMe.pdf for instructions on the basic setup, and found a hyper-link to the instructions, that didn’t work! bah. Solution The appliance comes as an OVA file for importation into vSphere/ESX, I’m assuming you have already imported the appliance....
Cisco ASA 5500 – Using a Third Party Digital Certificate
(For Identification, AnyConnect, and SSL VPN) KB ID 0000694 Problem A client asked me how to do this, so off I went to the test bench to work it out. Note: I’m this example In going to submit the request to, and issue the certificate from, my own windows domain certificate authority, you would send your request to a third party certificate authority, here’s a direct link to the certificate type you require. To use your own...
Cisco AnyConnect – Untrusted VPN Server Blocked!
KB ID 0000651 Problem The newest versions of the AnyConnect client now show you the following; If you are seeing this you’re using the (default) self signed certificate, or you connected to an IP address rather than the FQDN. But unlike before, you can now ‘lower’ the security so it does not warn you every time. Solution 1. From the warning screen (shown above) select ‘Change Settings…’. 2. Untick...
Dreamweaver CS6 – Backup and Restore Site Settings
KB ID 0000672 Problem If you are like me and struggle to remember settings, passwords etc. Then being able to back up all your website settings in Dreamweaver so you can restore them back again, (after a rebuild on a new PC) can save you some heartache. Solution 1. On the SOURCE machine, Launch Dreamweaver > Site > Manage Sites > Select the site in question > Select the ‘Export Site’ Icon. 2. Choose whether to...