Mail Routing Issue ‘451 5.7.3 Cannot achieve Exchange Server authentication’
KB ID 0000791 Problem While putting in a New Exchange 2010 server today, I test moved a mailbox to this new site, and could not get mail to flow to the Exchange 2010 server at the clients main site. 451 4.4.0 Primary target IP address responded with: “451 5.7.3 Cannot achieve Exchange Server authentication.” Attempted failover to alternate host , but that did not succeed. Either there are no alternative hosts, or delivery...
Error ID no: C00706ba When Changing Recipient Update Policy
KB ID 0000028 Problem When you try and change either the Domain Controller, or the Exchange Server to another Server, on the Exchange Recipient Update Services (RUS), you see the following error. Solution Drop to command line and try and ping the FQDN of the server you are trying to change to. A different IP address will probably respond, this will be due to an incorrect WINS/DNS entry, if you cannot find the incorrect entry,...
Windows – ‘The directory service has exhausted the pool of relative identifiers’
KB ID 0000797 Problem I got this error when attempting to bulk create users with CSVDE (see below). But you may simply see it when trying to create a user, or other AD object. Unwilling To Perform The server side error is “The directory service has exhausted the pool of relative identifiers.” Solution Well that is a scary looking error! Firstly make sure you can see all your FSMO role servers. Locate your FSMO Role...
Manually Configuring HP Wireless (MSM 720 controller) for Public and Private Wireless Networks
KB ID 0000833 Problem In the following procedure I’ll configure the following; HP 5412zl Switch. Cisco ASA 5510 Firewall. HP MSM720 Controller. HP MSM460 and MSM317 Access Points. If you are configuring an MSM765zl or MSM775zl use the following article first. HP MSM765zl and 775zl – Initial Setup and Routing Assumptions Private SSID will be on the normal corporate LAN (In this case 172.16.254.0/24). Public SSID will get...
Register HP Wireless Access Points With an HP MSM Controller on a Different Subnet
KB ID 0000913 Problem If you have HP Access Points on remote sites, you have the choice of either leaving them in automomous mode, or registering them with a controller at another site. This is handy if you want to manage all your VSC’s from one location. You can do this via DNS, or via DHCP at that remote site, (I tend to setup both to be on the safe side). Solution Option 1: Set MSM Controller Location via DHCP 1. On your...