Exchange – Change OWA Login to Username Only
KB ID 0000861 Problem The procedure for changing the user login process from domainnameusername to just username, is a little different with Exchange 2013. Solution 1. Connect to the Exchange admin center > Servers > Virtual Directories > Select OWA > Edit. 2. Authentication > Select ‘User name only’ > Browse and select the domain > Save. 3. At the warning click OK > Windows Key+R > cmd {enter}...
Exchange 2010 – Error in IIS Manager When Editing Authentication
KB ID 0000340 Problem Whist in IIS Manager and attempting to edit the authentication for the Exchange directory you see the following error, Error reads, There was an error while performing this operation. Details Filename: ?C:Program FilesMicrosoftExchange ServerV14ClientAccessowaweb.config. Line number: 30 Error: Configuration section not allowed to be set below application. Solution 1. Navigate to C:Program FilesMicrosoftExchange...
Mail Routing Issue ‘451 5.7.3 Cannot achieve Exchange Server authentication’
KB ID 0000791 Problem While putting in a New Exchange 2010 server today, I test moved a mailbox to this new site, and could not get mail to flow to the Exchange 2010 server at the clients main site. 451 4.4.0 Primary target IP address responded with: “451 5.7.3 Cannot achieve Exchange Server authentication.” Attempted failover to alternate host , but that did not succeed. Either there are no alternative hosts, or delivery...
JunOS – Using TACACS+ With Cisco ACS
KB ID 0001040 Problem I’ve been configuring a client’s Juniper SRX chassis cluster, for a while now. Their ACS was deployed last week so my task was to configure it to use the TACACS+ from the Cisco ACS server. The client’s setup required them to use their fxp0 management interfaces to perform the authentication. After it was configured and working, (due in no small part, to the ACS skills of Mr SteveH). I decided...
Cisco IOS – Enrolling for Certificates with NDES
KB ID 0000948 Problem To get your Cisco Router or Switch to enroll, and obtain a certificate from a Windows Server running NDES, this is the procedure you need to follow. Solution When dealing with certificates, it’s important that your device is maintaining the correct time. You can set this manually, but I’d recommend setting up NTP. Setting IOS Time (Manually and via NTP) 1. Choose either of the options below, (as...