Adding Drivers to Images on WDS
KB ID 0000314 Problem Before Server 2008 R2 when we needed to inject drivers into our WDS images we had to do it like this. Now however the process is a lot more elegant! Simply import the drivers into WDS, then inject them into the boot images (Yes the boot images NOT the Windows Images you are deploying!) Solution Add Driver Packages to Image is “Greyed out” If while attempting to add drivers, the option to “Add...
Windows Deployment Services (On Server 2008 R2) Deploying Windows 7
KB ID 0000180 Problem It’s been a while since I posted run through’s on WDS – they were on Server 2003, and were for deploying Windows XP. I’ve completely re-written this page and shot a series of videos to make the process a little easier to understand. Solution Step 1 Notes 1. If the WDS Server is NOT the DHCP server then do NOT tick both the DHCP options, (as stated in the video), on your DHCP scope...
Adding / Injecting Drivers into WindowsPE
KB ID 0000218 Problem A while ago I wrote an article about adding drivers to a WindowsPE Image, this was part of an installing Symantec Ghost with WDS procedure. Recently one of my colleagues was using my instructions, and despite his best efforts could not get the procedure to work with a new PC (Intel NIC). So he decided to give it a go with the new version of the WAIK he was successfull, but the procedure is slightly different....