Tag Archives: virtual machines

VMware – Cannot Cut, Copy, or Paste to VM’s

Posted on by

KB ID 0000515

Problem

Ever since ESX 4.1 this feature has been disabled and you have been unable to paste to VM, VMware say in their own documentation:

Source (Page 215 – ESX Configuration Guide ESX 4.1 vCenter Server 4.1).

To turn this feature back ON you have a few choices.

Please be aware: We are talking about copy and pasting TEXT to and from a guest VM NOT files and folders.

Solution

ESX Option 1 (Enable Copy and Paste to VM an individual Guest machine)

Using vSphere 8 or Above

Firstly, you need to shut the virtual machine down > Right Click it > Edit Settings >  Advanced > Add the following TWO attributes and values.

Add in the following two;
Attribute: isolation.tools.copy.disable, Value: false
Attribute: isolation.tools.paste.disable, Value: false

Click OK >  Power the VM back on.

Using HML5 Web Client (Enable Copy and Paste to VM)

Firstly, you need to shut the virtual machine down > Right Click it > Edit Settings > VM Options > Advanced  > Scroll down.

 

Edit configuration > Add configuration params;

Add in the following two parameters then click OK

Name: isolation.tools.copy.disable, Value: false
Name: isolation.tools.paste.disable, Value: false

Using Flash Web Client.

Firstly, you need to shut the virtual machine down > Right Click it > Edit Settings > VMware Option Tab > Advanced > Edit configuration > Add in the following;

Name: isolation.tools.copy.disable, Value: false
Name: isolation.tools.paste.disable, Value: false

 

OK > OK > Power on VM

Using VMware Client (Enable Copy and Paste to VM)

1. Firstly, you need to shut the virtual machine down > Right Click it > Edit Settings > Option Tab > Advanced > General > Configuration Parameters.

2. Select “Add Row” and add the following two options:

[box]isolation.tools.copy.disable

isolation.tools.paste.disable [/box]

Set both these values to FALSE > OK > OK > Power the VM back on again.

Note: Even without these values set, if a VM is vMotioned to an ESX host that has the copy.paste options set in it’s config file (see below) then these features are automatically enabled.

Option 2 (Enable Copy and Paste to VM on an individual Guest machine)

1. You can also achieve the same as above by directly editing the .vmx file for the virtual machine, Add the following two values as shown below:

[box]isolation.tools.copy.disable=”FALSE”

isolation.tools.paste.disable=”FALSE” [/box]

Note: Even without these values set, if a VM is vMotioned to an ESX host that has the copy.paste options set in it’s config file (see below) then these features are automatically enabled.

Option 3 (Enable Copy and Paste on the ESX host for all the VM’s on that host)

Note: This procedure will be removed/reset after an ESX upgrade. (You will need to carry out this procedure again post upgrade).

1. Connect to your ESX server, either directly on the console, or via SSH. and execute the following command:

[box]vi /etc/vmware/config[/box]

 

2. Press i to insert text and paste in the following two lines:

[box]isolation.tools.copy.disable=”FALSE”

isolation.tools.paste.disable=”FALSE” [/box]

Press Escape > then type :wq to save the changes.

Additional Steps for Linux / Ubuntu to allow Copy and Paste to VM

1. Assuming you have the VMware tools installed in your Linux guest VM, if not execute the following command:

[box]sudo apt-get install open-vm-toolbox[/box]

To enable copy paste on the guest execute the following command:

[box]vmware-toolbox &[/box]

One the VMware tools properties page pops up you will be able to copy and paste.

Enabling Copy and Paste in VMware Workstation

Out of the box, this functionality is switched on. However if you lose it then open the virtual machines settings > Options tab > Guest Isolation > Enable the Copy and paste option.

Related Articles, References, Credits, or External Links

NA

VMware ESX – When Deploying a Template ‘Network interface {name} uses network {name} which is not accessible’

Posted on by

KB ID 0000846 

Problem

I tried to deploy a VM Template today and was greeted with this error, I had renamed all the networks in this environment since I created this template, so I know why I was getting this error.

But there seems to be no way to edit the template itself to change the value to the correct network.

Solution

In the procedure below I will be jumping backwards and forwards between Hosts and Clusters view and VMs and Templates view. I’m assuming you know the difference between them, and how to switch between. Note: If you can’t see the templates then switch to VMs and Templates If you can’t see the storage then switch to Hosts and Clusters.

1. Browse your datastore(s), and locate the filename.vmtx that is associated with your ‘problem’ template, and download it to your PC/Laptop.

2. Open the vmtx file with a text editor, and locate the entry that refers to the ‘old network’.

3. Get the correct name of the new network from an existing working VM like so.

4. Change the entry in the vmtx file to the new name, then save the changes.

5. Now upload the edited file, to over-write the one in your datastore.

At this point you would thing that’s all you need to do. However before the change is recognised by Virtual Center, you need to remove then re-register it again.

6. Locate the template and remove it from the inventory.

7. Then right click your edited vmtx file and add it back to the inventory.

8. Now your template should deploy correctly.

Related Articles, References, Credits, or External Links

NA