Windows Deployment Services and Symantec Ghost
KB ID 0000108 Problem There’s very little about this that seems to be stored in one place out there on the Internet, Why would you want to use Ghost and WDS together anyway? Well once upon a time we used the PXE element is RIS, (WDS’s Predecessor) to use the Symantec GhostCast server. So yes I understand why people raise an eyebrow because you can achieve all your imaging needs with WDS alone. however people have invested...
WDS (Server 2003) Deploying Windows XP
For WDS on 2008 with Windows 7 Click Here KB ID 0000107 Problem This is aimed at people who want to capture a pre built machine and roll that image out to many PC’s. The client machine can either be vista or XP, at the time of writing most corporate’s are still using XP so I’ll use XP for this example. The whole procedure was done on the workbench in Virtual Server, which is how I recommend you try doing this before...
WDS Deploying Windows Part 2: Prepare Windows, and Capture to WDS
KB ID 0000737 Problem In part one we built and configured the WDS Server. Now you need to prepare the reference Windows 8 machine so that you can ‘capture’ its image. Solution Before you start, make sure that the machine you are imaging has PLENTY of room on one of its local drive(s), because it copies the image locally, before it sends it to WDS. Place Your Reference Windows 8 Machine in Audit Mode To put all the software...
Windows Deployment Services (On Server 2008 R2) Deploying Windows 7
KB ID 0000180 Problem It’s been a while since I posted run through’s on WDS – they were on Server 2003, and were for deploying Windows XP. I’ve completely re-written this page and shot a series of videos to make the process a little easier to understand. Solution Step 1 Notes 1. If the WDS Server is NOT the DHCP server then do NOT tick both the DHCP options, (as stated in the video), on your DHCP scope...