vSphere – Adding a Serial Port to a VM
KB ID 0001039 Problem I wanted to perform command line access to a virtual firewall on my home ESXi server, (a Juniper Firefly vSRX) via a console session. To do that I needed to add a serial port to that VM. Solution 1. From Within the VI client > Select the ESXi Host > Configuration > Security Profile > Firewall Section > Properties. 2. Locate and enable ‘VM serial port connected over network’ > OK. 3....
Setup an HP 1800-24G (J9028B) Switch
KB ID 0000800 Problem Essentially you can unbox this switch, plug it in and it will do what you want (unless you have VLANS, or trunks (port-channels)). Which is what my client had done, but I needed to get on the web console and have a look at what was going on, and there is NO CONSOLE socket on this unit at all. Solution 1. Don’t bother looking in DHCP, it’s NOT set to DHCP by default. From the factory the switch will have...