FortiGate: Change the HTTPS Fortigate Management Port
KB ID 0001723 Problem Like all firewalls that have ‘web management’ the default ports are 80 and 443 for insecure and secure management. IF you have secure (https) management on the outside interface of your firewall on the normal TCP port of 443. Then you can’t use the same interface to terminal SSL-VPNs. So you will need to change the FortiGate Management Port. You can set SSL-VPN to use a different port of course,...
Draytek Vigor Router Port Forwarding
KB ID 0000425 Problem This procedure was carried out on a Draytek Vigor 2800 Router, for this I needed to forward RDP (That’s on TCP Port 3389). Warning: If you need to forward any of the following ports 23 (Telnet), 80 (HTTP) , 443 HTTPS/SSL), 21 (FTP), or 22 (SSH). The Draytek has these reserved for remote management. You will need to change the port number (system Maintenance > Management > Management Port Setup)....
ASA 5585-X Update the CX SSP Module
KB ID 0001005 Problem Every piece of documentation I found on upgrading CX SSP modules was for doing so on models other than the ASA5585-X. The (current) latest CLI guide says; “For the ASA 5585-X hardware module, you must install or upgrade your image from within the ASA CX module. See the ASA CX module documentation for more information.” Yeah good luck finding that! Solution Before I saw the information above I tried...