Cisco IOS: Ether-Channel Trunks
KB ID 0001533 Problem This is a subject that every time I need to create an Ether-Channel I end up checking beforehand, so it’s about time I wrote it up. We are combining two different things, an Ether-channel, (an aggregation of links) and a Trunk (the ability to carry many VLANS). If you are NOT from a Cisco background then you might want to read though the following post first to avoid confusion about the world...
HPe Synergy 12000 MPIO QSFP to 10GB SFP Setup
KB ID 0001495 Problem I was recently involved in deploying an HPe Synergy 12000 Frame. And the network connections from it were ‘a little unusual’ so I thought I’d document that here, to save anyone else the problems I had. I was connecting to an HP/Aruba 5412 switch so my cables were all HP/Aruba (to be on the safe side). What you can see (above) is the MPIO Cable (K2Q46A P/N 800867-001) fixed onto the left (and...
Window Server – Configuring NIC Teaming
KB ID 0000786 Problem One great new feature of Server is bult in network ‘Teaming’. To do this normally takes some third party software, either form the server vendor (HP Teaming) or from the NIC manufacturer. It utilises a new Windows feature called LBFO, this lets you both aggregate links, and have links available in the event of failover. Note: NIC Teaming only supports up to 32 network cards. Solution 1. Launch Server...
HP and Cisco – VLANs and Trunks Confusion!
KB ID 0000741 Problem When I first started in IT, I went and did my Cisco CCNA. So I learned that to connect Cisco switches and pass VLAN traffic between them, I needed to create a ‘Trunk’ to pass the VLAN traffic. Fast forward a few years, and I now work for an HP reseller. Very early on I came to realise that what HP called a ‘trunk’ was very different from what I had been taught. Below is an article I did a...