Proxmox HA Cluster
Proxmox HA Cluster KB ID 0001872 Problem Proxmox HA Cluster: As the name implies this allows the cluster to ‘restart’ failed virtual machines on another host in the cluster in the event of a host failure. Unlike VMware (that has a vCenter appliance to do this) in Proxmox it can be configured from any host. Which may seem like an advantage – but the GUI can get a little ‘clunky’ whilst configuring HA....
Configuring Cisco HSRP
KB ID 0000946 Problem Cisco HSRP: Normally your client machines have one route off the network, (their default gateway). But what if that goes down? HSRP aims to solve this problem by assigning a ‘Virtual IP address’ to your default gateway (or default route). So that IP can be shared amongst two or more possible devices (routers, or layer 3 switches). Above, we have a client 192.168.1.10 that has two possible routes off...
Window Server – Configuring NIC Teaming
KB ID 0000786 Problem One great new feature of Server is bult in network ‘Teaming’. To do this normally takes some third party software, either form the server vendor (HP Teaming) or from the NIC manufacturer. It utilises a new Windows feature called LBFO, this lets you both aggregate links, and have links available in the event of failover. Note: NIC Teaming only supports up to 32 network cards. Solution 1. Launch Server...
Cisco ASA Redundant or Backup ISP Links with VPNs
KB ID 0000544 Problem This method provides failover to a redundant ISP link should your primary network connection go down. IT IS NOT going to load balance the traffic across both interfaces. In this example I’ve also got a VPN to a remote site and some port forwarding to contend with as well. Where we are at the start. Where we want to be Solution Before you go any further the ASA that will have the backup ISP line,...
Cisco ASA 5500 Active/Standby – Zero Downtime Upgrade
KB ID 0000733 Problem You have two ASA firewalls deployed in Active/Standby failover configuration, and need to upgrade either the operating system or the ASDM. As you already have a high availability solution you do not want any downtime. Before we start, we need to make sure we know the difference between primary, secondary, active and standby. From the rear (Active=Green, Standby=Amber) The Primary and Secondary firewalls are...