Cisco FTD: AMP/URL Filtering/Threat Detection and AVC
KB ID 0001686 Problem This brings me to the end of my recent FTD articles. Although this is not a complete run though of all the capabilities, it will point you in the right direction to enable; AMP Inspection. URL Filtering. IDS/IPS Inspection. AVC Inspection. Solution Each of these is a ‘Licensed Feature’ which means it’s going to cost you. Not only that, but you need to have the licences in your Cisco Smart...
Deploy Cisco FirePOWER Management Center (Appliance)
KB ID 0001263 Problem You have been able to manage your firewalls Internal SFR module for while using the ASDM Setup FirePOWER Services (for ASDM) For most people that’s fine, but if you have a lot of FirePOWER devices to manage that does not scale well. In those cases you should use theFMC (FirePOWER Management Center). Here ‘Im going to use the Vmware virtual appliance, (at time of writing there is no Hyper-V version)....
FMC – AMP Malware Inspection
KB ID 0001159 Problem If you take a look in your SourceFire dashboard, and there is no data shown on the malware threat section like so; Solution The message is pretty descriptive, and it’s telling you exactly what you need to do. Now I’m making the assumption that you have added a valid AMP / Malware licence like so; Policies > Access Control > Edit your access control policy > Then Edit the file policy. Add in...