Cisco Stacking 2960-X Catalyst Switches
KB ID 0001444 Problem You can stack up to 8 2960-X Switches*, you will require the stack modules and cables, (shown below). *Note: If you are studying for an exam, and the question is StackWize the answer is 9. Solution Stack Modules: Power down the switch, remove the blanking plate and fit the module, then when powered on you can use a show inventory command to make sure the module has been detected correctly. Switch#show inventory...
HP BL460c (Gen 10) Blade No RAID?
KB ID 0001443 Problem While spinning up some new BL460c (Gen 10) blades for a client, I noticed there was no RAID option? They were going to be VMware ESX hosts, and had two SSD drives so I just accepted the default and my ESX server saw a LUN for each drive and I created two DataStores on each host. The client wanted them changing to RAID1 (fair enough) so I revisited the drive setup. Solution WARNING: Before you proceed enabling...
vSphere: Setup Domain Authentication via PSC
KB ID 0001442 Problem If you separate your PSC (Platform Services Controller) and your vCenter, then you can setup domain authentication on your PSC. Solution Log into the web console of the PSC > Appliance Settings > Manage > Active Directory > Join > Supply a the domain name, a domain username and password > OK. You will see it has been successful as now you have a ‘Leave’ button. Configuration >...
Mac OSX: ‘Cannot Send F11 Keystroke’
KB ID 0001441 Problem I was building some HP blade servers today via iLO, and while trying to install ESX, I reached this stage; Pressing F11 on a mac just increases the volume, and with the other function keys (F1 to F10) you simply press ‘fn’ and the appropriate F key, and it works properly. But not on a mac, ‘Fn+F11’ just shows you your desktop. Even changing function keys in the keyboard settings has no...
vCenter and PSC: IE Content Was Blocked
KB ID 0001440 Problem I’d just installed a new vCenter and Platform Services Controller for a client this week. When I tried to access the web consoles I saw this. Content was blocked because it was not signed by a valid security certificate For information see “About Certificate Errors” in Internet Explorer Help. No amount of allowing certificates without revocation, and tinkering with the registry would let me in?...