Juniper SRX Firewall – Allow Web Management from Outside
KB ID 0000708 Problem Assuming you already have web management enabled, and you want to access it from the outside (the untrusted zone). Solution 1. Log into the web console of the Juniper. 2. Navigate to Security > Zones/Screen > Select the ‘Untrust’ Zone > Edit > Host inbound traffic – Interface > Select the Outside interface > Under Interface services add in ‘http’ > OK. 3. Then...
Cisco ASA to Juniper SRX Site to Site VPN
KB ID 0000710 Problem You want to establish a site to site VPN from a site with a Cisco ASA firewall, to another site running a Juniper SRX firewall. I had to do this this week, and struggled to find any good information to help. In the example below I’m configuring the whole thing from a laptop (172.16.254.206) that’s on the Juniper’s site. Use the diagram below, and substitute your own IP addresses and subnet...
Brocade 300 SAN Switch – Setup and Configure
KB ID 0000593 Problem I got a warning from a colleague that these switches, were no longer ‘Open’. i.e. You can no longer just plug them in, connect all your SAN devices and it will work. That’s how they used to work, so someone has decided to have then ‘Not Work’ out of the box (Nice one, well done). Solution Rack fitting the Brocade 300 SAN Switch 1. Each mounting rail is in three pieces (2 long pieces...