vSphere Adding iSCSI Storage
Mar26

vSphere Adding iSCSI Storage

vSphere Adding iSCSI KB ID 0001378 Problem iSCSI storage is nice and cheap, so adding iSCSI 10/1Gbps storage to your virtual infrastructure is a common occurrence. vSphere Adding iSCSI Solution (vSphere 7/8) Add a Software iSCSI Adaptor: Select the host > Configure > Storage Adapters > Add > Software iSCSI adaptor > OK. After a few seconds you should see it appear at the bottom of the list. Create a vSwitch and...

Read More
GNS3 Cannot Connect Network Interfaces when running on VMware vSphere
Nov17

GNS3 Cannot Connect Network Interfaces when running on VMware vSphere

KB ID 0000671  Problem I have plenty of real ASA firewalls to play with, but it’s getting round to re-certification time, so for ease I thought I’d run up a Virtual ASA on my vSphere 5 box just for testing and breaking. However no matter what type of Virtual Network adaptor I used (vmxnet3, e1000, etc) I could not connect to the virtual firewall. Solution 1. Firstly make sure you actually have an IP address in the correct...

Read More
Cisco Catalyst – Configure Ports for VMware ESXi NICs using VLANS
Nov17

Cisco Catalyst – Configure Ports for VMware ESXi NICs using VLANS

KB ID 0001065  Problem If you don’t need different virtual machines to be in different VLANS on your vSphere/ESXi servers then you probably just connect everything together and it all works fine. I was trying to carve off some hosts into their own VLAN today, and setup a new vSwitch. or if you prefer to work in the fat client. Now you can see (above), I’ve presented one physical NIC to this vSwitch (vmnic1). This is...

Read More