Deploy Cisco FirePOWER Management Center (Appliance)
KB ID 0001263 Problem You have been able to manage your firewalls Internal SFR module for while using the ASDM Setup FirePOWER Services (for ASDM) For most people that’s fine, but if you have a lot of FirePOWER devices to manage that does not scale well. In those cases you should use theFMC (FirePOWER Management Center). Here ‘Im going to use the Vmware virtual appliance, (at time of writing there is no Hyper-V version)....
VMware ESX – Enable ‘Embedded Host Client’
KB ID 0001231 Problem Since ESX 6.0.0 Update 2 you’ve been able to use the Embedded Host Client in ESX. Which is great if (like me) you use a Mac because I don’t have to fire up a windows box to load the ‘Fat’ VI client anymore. What about older version of ESX? If you are running 5.5 (update3) or newer then you can install and use the Embedded Host Client. Why didnt you just upgrade to 6.0.0 Update 2? Well my...
vSphere – ‘The Number of HA Heartbeat Datastores for this host is 0’
KB ID 00011202 Problem Seen after enabling HA on your vSphere Cluster HA Error: The number of heartbeat datastores for host is 0, which is less than required: 2 or HA Error: The number of heartbeat datastores for host is 1, which is less than required: 2 I had this on my test network today, and to be honest thats not really surprising because I don’t have any shared storage. Note: You can see the same error if your ‘HA...
VMware View 5 – Configure and Deploy Clients in ‘Kiosk Mode’
KB ID 0000610 Problem Kiosk mode is quite useful, if you have some machines that you want to put in a public area for visitors to use, or for machines that are used in displays etc. Or if you have some older PC’s that you just want to repurpose as internet terminals or ‘point of sale’ box’s. Essentially it’s a system that delivers a virtual VMware View desktop to a PC or Thin client without the need to...
VMware View – Windows Pool ‘Stuck’ on Customizing
KB ID 0000646 Problem While trying to deploy a Windows XP Pool yesterday, I hit upon this problem. Windows 7 works fine, but as soon as I tried to roll out a Windows XP pool, they stopped like this; After a couple of hours, the whole operation timed out, and each machine shows as; Status {Date}{Time} o’clock {Time-Zone}: Customization operation timed out I tried to deploy the pool with both ‘quick prep’ and...