You can still right click the networking icon in your task tray and manually join a wireless network, but with the new UI there is a much more user friendly way.
Solution
1. Bring up the Settings menu (Press Windows Key+I, or swipe in form the left on a tablet/tablet) > Select the available networks icon.
2. Select the wireless network you want to connect to.
3. If you want to always connect to this network tick the box and select ‘Connect’.
4. If your router has a PIN number for access (check its documentation) then you can enter that here, and follow the instructions. The PIN number is usually shown on the router/access point on a sticker. However if you use a WEP or WPA password, then select ‘Connect using security key instead’.
Note: The system for joining a wireless netork using a PIN number, is very insecure! just to a Google search for “hacking wireless with reaver”, I suggest you disable this feature if you can.
5. Type in your WEP/WPA Key > Next.
6. All being well, you should now be connected.
Related Articles, References, Credits, or External Links
When Cisco released the 8.2 version of the ASA code, they changed their licensing model for AnyConnect Licenses. There are two licensing models, Premium and Essentials.
Solution
Cisco ASA AnyConnect Premium Licenses.
You get two of these free with your firewall*, with a ‘Premium License’ you can use the AnyConnect client software for remote VPN Access, and you can access Clientless SSL facilities via the web portal.
*As pointed out by @nhomsany “The two default premium licenses available are NOT cross-platform, (i.e. only Mac or Windows).
Additionally you can use this license’ model with the Advanced Endpoint Assessment License’, this is the license’ you require for Cisco Secure Desktop. You can also use this license’ with the AnyConnect Mobile license’ for access from mobile devices like phones or tablets, (both these licenses are an additional purchase).
For most people wishing to buy extra AnyConnect licensing, this will be the one you want. Their type and size differ depending on the ASA platform in question, e.g. the 5505 premium licenses. are available as 10 session and 25 session licenses. the 5510 are in 10, 25, 50, 100 and 250 Sessions. (Note: These are correct for version 8.4 and are subject to change, check with your re seller).
Failover: If you are using failover firewalls you can (but don’t have to) use a shared license’ model, this lets you purchase a bundle of Premium licenses. and share them across multiple pieces of hardware, This requires an ASA to be setup as the license’ server’. Before version 8.3 you needed to purchase licenses for both firewalls. After version 8.3, Cisco allowed the licenses. to be replicated between firewalls in a failover pair. The exception is Active/Active where the amount of licenses. is aggregated together from both firewalls and ALL are available providing the figure does not exceed the maximum for the hardware being used.
Cisco ASA AnyConnect Essential Licenses
When you enable ‘Essential Licensing’, your firewall changes it’s licensing model and the two Premium licenses. you get with it are disabled*. The Firewall will then ONLY accept AnyConnect connections from the AnyConnect VPN client software.
Note: The portal still exists, but can only be used to download the AnyConnect Client Software.
With Essentials licensing enabled, the firewall will then accept the maximum VPN sessions it can support for that hardware version (see here), without the need to keep adding licenses.
Note: Remember these are “Peer VPN Sessions”. If you have a bunch of other VPN’s (including IPSEC ones), then these are taken from the ‘pot’.
Additionally, you can also use this license’ with the AnyConnect Mobile license’ for access from mobile devices like phones or tablets, this license’ is an additional purchase.
Failover: Prior to version 8.3, if you have failover firewalls and are using Essentials licenses you need to purchase an Essentials license’ for BOTH firewalls. After version 8.3 Cisco allowed the licenses. to be replicated between firewalls in a failover pair.
*To re-enable the built in Premium Licenses. you need to disable Essentials licensing by using the ‘no anyconnect-essentials” command or in the ASDM> Configuration > Remote Access VPN > Network (Client) Access > Advanced > AnyConnect Essentials.
Related Articles, References, Credits, or External Links
