Juniper JUNOS SRX NAT – Static ‘One-to-One’
SRX NAT KB ID 0000995 Problem Setting up ‘Static NAT’ is the process of taking one of your ‘spare’ public IP addresses, and permanently mapping that public IP to a private IP address on your network. In the example above I want to give my web sever which has an internal IP address of 192.168.1.10/24, the public IP address of 1.1.1.5/24. So if someone out on the Internet wants to view my website, they can...
Cisco ASA Static (One to One) NAT Translation
KB ID 0000691 Problem Note: This is for Cisco ASA 5500, 5500-x, and Cisco Firepower devices running ASA Code. If you have a spare/available public IP address you can statically map that IP address to one of your network hosts, (i.e. for a mail server, or a web server, that needs public access). This is commonly referred to as a ‘Static NAT’, or a ‘One to One translation’. Where all traffic destined for public...