Cisco FirePOWER – Adding a Static Route
KB ID 0001172 Problem Routing traffic back from the ASA , in most cases you will have a static route (or routes) tied to the inside interface of the firewall. Or you may have dynamic routing if your network is a little more complex. But your FirePOWER module is essentially a small Linux box sat inside the firewall, it has its own network connection and maintains its own routing table. You may have already noticed if your FirePOWER...
Cisco FirePOWER – Update Fails ‘Peer Registration Failed: Registration in Progress’
KB ID 0001162 Problem If you attempt to perform an update on the FirePOWER services module in your firewall, you may see the following error; Error Installation Failed: Peer registration in progress. Please retry in a few moments I found myself in this situation because I’d attempted to register the firewall in the FirePOWER Management Center Appliance, and the process failed, (because the versions were different). So when I...
ASA Setup FirePOWER Services (for ASDM)
KB ID 0001107 Problem Both the 5506-X (rugged version and wireless), and 5508-X now come with a FirePOWER services module inside them. This can be managed from either ASDM* (with OS and ASDM upgraded to the latest version), and via the FireSIGHT management software/appliance. Related Articles, References, Credits, or External Links *UPDATE: All ASA ‘Next-Gen’ firewalls can now have their Firepower Service Module managed...
Cisco ASA 5500-X Restart the FirePOWER Service Module
KB ID 0001101 Problem I’ve only just recently started to work with these, the advantage of them is they are great for SOHO and SMB, and they don’t need additional SSD drives installing. Note: This also procedure works on the larger ASA5500-X firewalls that have Firepower installed on an internal SSD drive, (i.e. 5512,5515,5525, and 5545 etc.) While getting them to work with a Sourcefire appliance, I had to...