VMware Enable SSH (vSphere ESX)
VMware Enable SSH KB ID 0000299 Problem Should you wish to get SSH (remote secure console) access to your ESX hosts, you need to do the following. ESX Version 8 and Newer ESX Version 6.5 and Newer ESX version 5 and Newer ESX version 4.1.0 ESX version 4.0.0 and earlier ESX version 4.0.0 and earlier Solution VMware Enable SSH ESX 8.0 Directly on an ESX Host: If you have a stand-alone ESX Server running version 8.x, Log in via the...
TinyCore Linux: Build a ‘Persistent’ Web Server
KB ID 0001697 Problem Recently I was building a lab for testing load balancing, and needed some web servers, I could have built three Windows servers, but I wanted to run them in EVE-NG, so they had to be as light as I could make them. I chose TinyCore Linux, (I know there are smaller options, but it’s light enough for me to run, and work with). The problem occurs when you reboot the TinyCore host, it (by default) reverts back...
Can I delete _vti_inf.html and the _vti folders?
KB ID 0000742 Problem I was doing some site tidying this week, usually If I don’t know what something is I leave it alone, but I was on a mission! I had a bunch of files/folders in the root of my website, that, a) I didn’t know what they were doing, and b) wanted to delete. File: _vti_inf Folders: _private, _vti_bin, _vti_cnf, _vti_log, vti_pvt, _vti_txt Solution As it turns out these folders are needed for FrontPage and...
Cisco – Configuring Dynamic Multipoint Virtual Private Networks DMVPN
KB ID 0000954 Problem A while back I uploaded a run through on how to deploy GRE tunnels and protect those tunnels with IPsec. That point-to-point GRE tunnel is a good solution, but if you have a lot of sites it’s not a solution that scales very well. Yes you can have 2147483647 tunnel interfaces, but good luck manually configuring all those tunnels and even if you did, if you want each of your remote sites to talk to each other...
Cisco ISE – Replace the Self Signed Certificate
KB ID 0001068 Problem Cisco ISE arms itself with a self generated certificate out of the box, (well the NFR appliance does anyway). To replace that cert with one signed by your own CA, this is the procedure. (Note: I’m using Microsoft Certificate Services on Server 2012 R2). Solution Step 1: Import the CA Certificate into ISE Note: If you have a lot issuing servers it’s a good idea the repeat this procedure for EVERY...