Avaya / Nortel Switch Notes
KB ID 0001285 Problem I don’t often use Nortel (now Avaya) switches, I know they are decent, but in my day job I usually work on Cisco, occasionally HP, and other cheap assorted nastiness switches. I was replacing an old 10/100 Cisco 3750 switch with a Nortel 4526GTX this week, and thought I’d take some notes for the common things I do, just in case I have to do another. So this post is an eclectic collection of the...
Installing the Hyper-V Management Tools
Pete’s Adventures in Hyper-V Part 2 KB ID 0000093 Dtd 10/11/09 Problem Back in Part 1 we looked at getting your Hyper-V Media up to date, the next logical step would be to install Hyper-V, but I’ve never been that logical, and I already had a Hyper-V server at home, So I thought before I went any further I would install the Hyper-V Management tools on My laptop, then I could continue this from the comfort of my sofa. In an...
Cisco IOS – Setup Remote Telnet/SSH Management
KB ID 000093 Problem Having the ability to remotely administer network devices, means I don’t have to get my lazy carcass out of my chair and start fishing console cables out of my bag, also it saves on shoe leather, and travelling time. Solution Cisco Router / Switch – Setup Telnet Access These days people frown at Telnet. It’s an insecure protocol so your password is sent in clear text over the wire, and can be...
Manage Cisco ASA5500 From Outside
KB ID 0000068 Problem Note: This is an old article, you might want to go here If you have to look after a lot of client firewall’s, or you simply want to be able to manage your own remotely then this can be done via the ASDM console. Solution 1 Log into the firewall > Go to enable mode. Ciscoasa Password: ******* 2 Go to configure terminal mode. ciscoasa# conf t 3. Turn on the ASDM Server. ciscoasa(config)# http server enable...
Cisco ASA 5500 – Remote Management via VPN
KB ID 0000984 Problem It’s been ages since I has to do this, I usually just manage firewalls via SSH from outside. But I was out on a client site last week and needed to connect to to my ASA, so I simply connected in via AnyConnect; Note: The same procedure is applicable if you are an IPSEC VPN client, L2TP VPN client, or simply coming in over a site to site VPN link. And attempted to SSH, no joy, I tried the ASDM, nothing. So...