Juniper SRX Firewall – Allow ‘Ping’
KB ID 0000706 Problem I was working on an SRX100B Firewall yesterday, and needed to be able to ping the outside interface. Solution Note: You can quickly enable ping on a physical interface from CLI like so; set security zone security-zone trust interface ge-0/0/0 host-inbound-traffic system services ping 1. Log into the web console of the Juniper. 2. Navigate to Security > Zones/Screen > Select the ‘Untrust’ Zone...
HP E Series Wireless – Cannot Access Local LAN
KB ID 0000486 Problem You have an HP HP E-Series Mobility E-MSM460, 466 & 430 Access Point, and you cannot access resources on your local LAN (though internet access works fine). This is default “Out of the box” behavior, a lot of consumers want to provide wireless access but DONT want the wireless clients having access to their local servers. That’s fine but what if you do? Solution 1. Log into the web...
Manually Configuring HP Wireless (MSM 720 controller) for Public and Private Wireless Networks
KB ID 0000833 Problem In the following procedure I’ll configure the following; HP 5412zl Switch. Cisco ASA 5510 Firewall. HP MSM720 Controller. HP MSM460 and MSM317 Access Points. If you are configuring an MSM765zl or MSM775zl use the following article first. HP MSM765zl and 775zl – Initial Setup and Routing Assumptions Private SSID will be on the normal corporate LAN (In this case 172.16.254.0/24). Public SSID will get...