Juniper SRX Cluster (Active / Standby)
SRX Cluster KB ID 0000990 Problem I’ve had very little exposure to JUNOS and Juniper equipment, and later in the year I have to deploy some for a client in a failover cluster. So I had a good look round on the Internet, and found loads of good blog posts and KB articles like this one. The problem is they are all geared to setting up a cluster, they ASSUME you then know about security zones, how to add default routes, and setup...
EVE-NG Deploying F5 BIG-IP
KB ID 0001696 Problem I already had some F5 Images in my EVE-NG, but I wanted to run version 16.x. However, I didn’t think that was officially supported, so I thought I would try and get it running anyway! Solution Theres no need to scour the internet for ‘dodgy’ versions, F5 will quite happily give you the latest version, just sign up for a free account, and you can download the image. While you are there, you can...
VMware ESX Error “cmd addnode failed for primary node: Internal AAM error”
KB ID 0000298 Problem Seen in a Virtual Center HA environment – even after selecting “Reconfigure for HA” on the ESX host. Errors: cmd addnode failed for the primary node:Internal AAM error – agent could not start – Unknown HA error. Cannot complete the configuration of the HA agent on the host – See the task details for additional information. Other HA configuration error. Solution 1. How...