I’m Going on Holiday, What do I need to Disable on my iPhone?

KB ID 0000622 

Problem

Here in Europe the big mobile Telco’s are being forced to keep roaming prices down. But going abroad with all your data services turned on can mean you might come back to a big bill.

Solution

1. On most peoples phones “Data Roaming” is already disabled (Mines always off).Data Roaming is designed to let you use another provider’s phone network if your carrier signal is too weak. On some sites it says you cant use your phone abroad if you have this disabled I DISAGREE, I’ve got it disabled and I use my phone every time I’m out of the country?

Settings > General > Network > Data Roaming.

2. If you see ActiveSync and/or have mail pushed to your phone, you might want to also disable “Mobile Data” to stop that happening while your away.

Settings > General > Network > Mobile Data.

3. That’s Data stopped but your phone will still function as a phone. WARNING you may still be charged “call forwarding” if your phone rings and you let it go to answer phone while you are away. I don’t mind that, because I prefer to keep my phone on. If you want to disable the phone and text features as well, e.g. You Just want to use the Camera, iPod, and Alarm capabilities. Then just put the phone in Airplane mode, (which isn’t a word Apple! The word is Aeroplane!)

Settings > Airplane Mode.

Related Articles, References, Credits, or External Links

NA

Cisco Firewalls Changing the Web Management Port

Cisco 5500 Changing the ASDM Port
Unable to Port Forward HTTPS

KB ID 0000268

Problem

You want to change the port that the Cisco ASDM runs over, or you are attempting to port forward https/ssl and see the following error

Error:
ERROR: unable to reserve port 443 for static PAT
ERROR: unable to download policy

You are trying to port forward (Create a static PAT entry) on a Cisco ASA for port 443 / https. This port is in use by the ASDM.

Solution

Change the Cisco ASA ASDM Port via Command Line

Connect to the ASA via command line. (In the following example I’ll change the ASDM to use TCP port 2456).

code?

Change the Cisco ASA ASDM Port via ASDM

1. Connect to the the Cisco ASDM > Configuration > Device Management > Management access > ASDM/HTTPS/Telnet/SSH > http Settings > Port Number > Change accordingly > Apply.

2. Save the new config > File > “Save Running Configuration to flash”.

Cisco PIX (Version 6) Firewalls – Disable Web Management

If you are stuck on version 6, i.e. you are running a PIX 506E or PIX 501, then you CANNOT change the PDM port. you only option is to disable the PDM if you want to port forward https / ssl / TCP Port 443.

 

Related Articles, References, Credits, or External Links

Cisco ASA – Allow Remote Management

Original Article Written 25/03/11