Cisco – Cannot Connect to the ASA FirePOWER Module
KB ID 0001182 Problem There’s an alarming amount of people who have contacted me about this error; Cannot connect the the ASA FirePOWER module. Cannot connect the the ASA FirePOWER module.. Check that it is correctly configured and on the network. It’s also possible that the management address is being translated by NAT. Please verify the IP address/Hostname and port. Note: If you have just updated or re-imaged the SFR...
Cisco FirePOWER SFR Module Cannot Ping
KB ID 0001174 Problem On a newly deployed FirePOWER service module I wanted to test connectivity and attempted to ping a public IP address. This is what happened; > expert admin@Petes-SFR:~$ ping 8.8.8.8 ping: icmp open socket: Operation not permitted My first though was, “Well you have to set a default gateway on the SFR when you set it up, so the firewall is probably blocking ICMP”. So I checked the default policy...
Cisco ASA – Port Forwarding To A Different Port
Port Translation KB ID 0001087 Problem Note: This is for Cisco ASA 5500, 5500-x, and Cisco Firepower devices running ASA Code. A very long time ago I wrote an article about how to port forward from a public IP address to multiple servers for RDP. Basically you would connect to the firewall using various different ports, and the firewall would change the port to the correct one for RDP (TCP port 3389, unless you changed it on the...