Cisco SFR Cant Ping its Default Gateway?
KB ID 0001575 Problem This is a strange one? I was deploying FirePOWER to a pair of ASA 5550-8-X firewalls in Active / Standby failover last week. After each SFR was updated (via ASDM.) I could no longer ‘ping it’, the SFR itself could ping everything on the same VLAN, APART from its own default gateway, (which was an SVI on the Cisco 3750 switch it was connected to). This happened every time I updated the SFR, (or...
Cisco 5506-X / 5512-X SFR Unsupported
KB ID 0001522 Problem After upgrading an ASA 5506-X to Version 9.10, I was about to re-image the FirePOWER SFR module. I went to load the boot image and this happened; sw-module module sfr recover configure image disk0:/asasfr-5500x-boot-6.3.0-3.img ^ ERROR: % Invalid input detected at ‘^’ marker. At first I thought “Oh great, the syntax has changed, there’s another post to update”. But no, the command is...
FirePOWER: ‘No Authentication Required’ No Usernames
KB ID 0001460 Problem When attempting to track Users with FirePOWER, the FMC would not show any usernames? Solution Theres a lot of reasons this might not work, let’s take a look at a few of them. Firstly make sure the server running the ‘user agent’ is listed under System >Integration > Identity Sources > User Agent. It probably goes without saying, but over on server running the user agent, make sure it...
Cisco FirePOWER (On-Box / ASDM) Change the Time Zone
KB ID 0001363 Problem At first this was just a bug, now it’s annoying, I don’t know why Cisco have not got round to fixing this, it’s still a problem in the latest (6.2.2 at time of writing,) version. Solution Configuration > ASA FirePOWER Configuration > Local > System Policy > Time > Synchronisation > Manually > Save Policy and Exit. Deploy > Deploy FirePOWER Changes > Deploy. To View...
Updating FirePOWER Module (From ASDM)
KB ID 0001348 Problem Normally I don’t like upgrading the SFR this way. But then I tend to install new firewalls set them up and walk away, so its easier (and a LOT quicker) to simply image the module to the latest version and then set it up. Like So; Re-Image and Update the Cisco FirePOWER Services Module This week I had an existing customer, who has an ASA5508-X but wasn’t using his FirePOWER, I’d installed the...