Cisco Firepower 1010 (FTD) Initial Setup
KB ID 0001678 If you’re here you’ve either purchased a new Cisco Firepower device running FTD (FirePower Threat Defence) or have re-imaged your Firepower device from ASA to FTD code. On its factory defaults, the unit will have the following settings. Inside IP address (VLAN 1) 192.168.1.1 (on all interfaces from 2 to 8). Outside IP Address set to DHCP in interface 1. Management IP address 192.168.45.1 on the Management...
Reimage Cisco 1010 ASA to FTD
KB ID 0001677 Problem Sorry it’s taken me a while to get round to this, every time I do some work on the firewall I need to kill the internet at home, and I’ve got a wife and two daughters, who live online! So if you follow the site you will know I’ve got a Cisco Firepower 1010 device, and I’ve been looking at it running the ASA code. Now here’s how to ‘re-image’ the device with the FTD...
Cisco Firepower 1010 Configuration
KB ID 0001673 Background This page will be used as a central repository and ‘index’ for configuration on the Cisco Firepower 1010 series firewall. I intend to add to it as I test the capabilities and work out any problems whilst trialing/deploying and operating this platform. Config Documents VPN Firepower 1000 series running ASA Code. General Cisco Firepower 1010 Licensing Reimage Cisco 1010 ASA to FTD VPN EZVPN Is not...