Direct Access – Error While Running The Remote Access Wizard
KB ID 0000839 Problem Seen on Windows Server 2012, when configuring direct access, while running the ‘Getting Started Wizard’ you have to choose the network topology. You have a choice of edge, behind an edge device (with 1 NIC), or behind an edge device (with 2 NICs). Each choice you make will present you with one of the following errors. An external adapter with a public IP address, IPv6 enabled and without a domain...
Windows Server 2012 ‘Direct Access with Windows 8’
KB ID 0000842 Problem In the following procedure I’m using Window Server 2012, and Windows 8 Enterprise, I am NOT configuring for Windows 7 so I don’t need to worry about PKI and certificates. (Other than the one the direct access server uses for https identification). I’m not adding in any Application or Infrastructure servers, this is just a basic run through on setting up Direct Access to get you up and running....
Windows 8 – ‘Network Connectivity Assistant service is stopped or not responding’
KB ID 0000841 Problem When attempting to check Direct Access connection status on a Windows 8 client machine with a Get-DaConnectionStatus command you see the following error; Get-DaConnectionStatus : Network Connectivity Assistant service is stopped or not responding. OK, so lets go and check the status of that service, if it starts great, but mine did not as you can see. And it logged an Event ID 7024 The Network Connectivity...