Configuring Cisco HSRP
Feb08

Configuring Cisco HSRP

KB ID 0000946  Problem Cisco HSRP: Normally your client machines have one route off the network, (their default gateway). But what if that goes down? HSRP aims to solve this problem by assigning a ‘Virtual IP address’ to your default gateway (or default route). So that IP can be shared amongst two or more possible devices (routers, or layer 3 switches). Above, we have a client 192.168.1.10 that has two possible routes off...

Read More
Cisco ASA 5500 Allowing Tracert
Nov17

Cisco ASA 5500 Allowing Tracert

KB ID 0000753 Problem I’d always assumed that as Tracert uses ICMP, and that simply adding ICMP inspection on the ASA would let Tracert commands work. A client of mine is having some comms problems and wanted to test comms from his remote DR site, he had enabled time-exceeded and unreachable on the ASA (for inbound traffic) and that had worked. I checked the default inspection map and found inspect ICMP was there? As it turns...

Read More