Updating the AnyConnect client for Deployment from the Cisco ASA 5500
Jun15

Updating the AnyConnect client for Deployment from the Cisco ASA 5500

KB ID 0000704  Problem Your ASA will (by default) update your AnyConnect clients to the latest client software when they connect. However you need to supply the ASA with the updated packages first. Solution 1. Download the latest AnyConnect client package, from Cisco. The one you want will have a file extension of .pkg AnyConnect 4 AnyConnect 3 2. Connect to the ASDM > Configuration > Remote Access VPN > Network (Client)...

Read More
Cannot Open a Console Session in the VMware VI Client on Windows 8
Nov17

Cannot Open a Console Session in the VMware VI Client on Windows 8

KB ID 0000677  Problem Mostly my conversion to Windows 8 has been pretty painless, the only thing that wont work is the VMware VI client cant open a console session to the VMs on my ESX server. Error The VMRC console has disconencted…attempting to reconnect This happens because the IE10 that comes with Windows 8 does NOT LIKE the requests the VI client is sending to the Internet Explorer plug-in. Update 08/03/13 – This...

Read More
Install and Configure an HP UPS Network Module
Nov17

Install and Configure an HP UPS Network Module

KB ID 0000813 Problem I installed one of these a couple of weeks ago, and there’s some good documentation with the module itself so installing it into the UPS and giving it an IP address was easy, getting the right client software to talk to it was a pain. Solution Configure the Network Module 1. Physically install the module in the UPS, it’s fixed with two screws and you can install it with the UPS powered on. 2. It takes a...

Read More
Cisco ASA 5500 Client VPN Access Via Kerberos (From CLI)
Nov17

Cisco ASA 5500 Client VPN Access Via Kerberos (From CLI)

KB ID 0000049 Problem You would like to enable remote access for your clients using the Cisco VPN Client software. Solution Before you start – you need to ask yourself “Do I already have any IPSEC VPN’s configured on this firewall?” Because if its not already been done, you need to enable ISAKMP on the outside interface. To accertain whether yours is on, or off, issue a “show run crypto isakmp”...

Read More
Cisco ASA5500 Client IPSEC VPN Access
Nov17

Cisco ASA5500 Client IPSEC VPN Access

(This method uses the ASA to hold the user database) to use RADIUS CLICK HERE to use Kerberos CLICK HERE KB ID 0000070 Problem Note: IPSEC VPN is still possible, but getting Windows clients is a little sketchy, and you will have to mess about with them to get them to work on modern versions of Windows. (Mac OSX and iPhone/iPad can connect with their built in VPN software though). Below is a walkthrough for setting up a client to...

Read More