Juniper SRX Cluster (Active / Standby)
SRX Cluster KB ID 0000990 Problem I’ve had very little exposure to JUNOS and Juniper equipment, and later in the year I have to deploy some for a client in a failover cluster. So I had a good look round on the Internet, and found loads of good blog posts and KB articles like this one. The problem is they are all geared to setting up a cluster, they ASSUME you then know about security zones, how to add default routes, and setup...
Juniper SRX – ‘The Routing Subsystem Is Not Running’
KB ID 0001045 Problem While trying to deploy Solarwinds to monitor a Juniper SRX failover cluster, we were having no joy connecting to the management interface of the secondary/standby firewall. The management (fxp0) interface on the primary (node0) firewall we could get to OK. ] After jumping on the secondary firewall (via the console connection) we observed the following; error: the routing subsystem is not running Solution As you...