VPN Error – ‘CRYPTO-4-RECVD_PKT_NOT_IPSEC’

KB ID 0000936  Problem While setting up a simple site to site to site VPN, I was unable to get ISAKMP phase 1 to establish. When I had a look on the device at the far end. I saw this error logged in the console, every time I tried to bring up the tunnel. *Mar 1 00:21:42.811: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec’d packet not an IPSEC packet. (ip) vrf/dest_addr= /192.168.2.3, src_addr= 192.168.1.2, prot= 1 Solution After about 40...

Read More
Cisco ASA 5500 Client VPN Access Via Kerberos (From CLI)
Nov17

Cisco ASA 5500 Client VPN Access Via Kerberos (From CLI)

KB ID 0000049 Problem You would like to enable remote access for your clients using the Cisco VPN Client software. Solution Before you start – you need to ask yourself “Do I already have any IPSEC VPN’s configured on this firewall?” Because if its not already been done, you need to enable ISAKMP on the outside interface. To accertain whether yours is on, or off, issue a “show run crypto isakmp”...

Read More
Cisco Firewalls Changing the Web Management Port
Nov17

Cisco Firewalls Changing the Web Management Port

Cisco 5500 Changing the ASDM Port Unable to Port Forward HTTPS KB ID 0000268 Problem You want to change the port that the Cisco ASDM runs over, or you are attempting to port forward https/ssl and see the following error Error: ERROR: unable to reserve port 443 for static PAT ERROR: unable to download policy You are trying to port forward (Create a static PAT entry) on a Cisco ASA for port 443 / https. This port is in use by the ASDM....

Read More
Cisco Remote (IPSEC) VPN Clients Timeout / Disconnect
Nov17

Cisco Remote (IPSEC) VPN Clients Timeout / Disconnect

KB ID 0000309  Problem By default, your remote VPN clients will timeout their connections after 300 seconds of inactivity, should you wish to increase that you can, on a user by user basis, however sometimes that does not work. To fix the problem you need to disable ISAKMP monitoring at the “Head End”. Solution Enable via Command Line (see below for ASDM instructions) 1. Connect to the the firewall (see here for...

Read More
Site to Site IPSEC VPN from SonicWALL to Cisco ASA
Nov17

Site to Site IPSEC VPN from SonicWALL to Cisco ASA

KB ID 0000357 Problem You want to put in a secure IPSEC VPN tunnel from a Cisco ASA Device to a Sonicwall Firewall. Note in this example we will use 3DES for encryption, SHA1 for Hashing, Diffie Hellman Group 2, PFS enabled, and we will use a shared secret (Pre Shared Key). SonicWALL used in this example is a PRO 3060. Solution The main two gotcha’s Update 12/03/11 Feedback from Wajma Omari: I would like to add that this...

Read More