RDS – Custom Start Menu (Remove Administrative Tools)
KB ID 0001207 Problem Why is it so difficult to remove Administrative tools! The one folder you might not want your users having access to is on everyones start menu by default? I’ve seen posts saying to change the permissions so users can’t run the snap-in’s in that folder, and other posts that suggest removing it from the ‘all users’ profile, and yet more posts that say remove it in preferences with a...
Linux (CentOS 7) Generating CSR (Certificate Signing Requests)
KB ID 0001206 Problem If you want to use digital certificates on your CentOS server, then you will need to generate a CSR. It does not matter if you want to purchase a publicly signed certificate, or even if you are going to sign your own. Below is how to generate a CSR for a single web host. Note: Most cert vendors now require a minimum key length of 2048 so thats what I’m going to use. And I’m assuming you have openSSL...
Cisco Stacking 3750 Switches
KB ID 0001205 Problem You can stack Cisco 3750-X Switches in groups of up to 9 switches, and they can then be managed as one switch. Here I’ve got 2 switches. Solution Removing 3750-X Switches Stack Configuration One of my switches had already been in a stack, so I needed to remove its stack configuration. It thought it was switch 4 in the stack so I issued the following commands; Switch(config)# no switch 4 provision...
Mac OSX – Testing Packet Fragmentation Over VPN
KB ID 0001204 Problem Many moons ago I wrote a post about a problem where I had no RDP over a VPN connection, and all the hoops I jumped though to troubleshoot and fix the problem. Today I had a similar problem, I was connected to a client via Cisco AnyConnect, and I had hair-pinned that traffic, from the client site, over an IPSEC VPN to their servers in the Data Center. Pings were successful, but not RDP. To be honest this affects...
Windows Server – Disk Performance Missing From Task Manager?
KB ID 0001203 Problem If your machine is struggling, a good place to look first is the performance tab on ‘Task Manager’ Here you can see CPU and Memory Stats and how our network cards are performing, but wheres the disk stats? Solution Before you can see them you need to enable them, open a PowerShell, (or an administrative command window). and run the following command; diskperf -y Now re-open task manager and go to...