Install and Configure Certificate Enrolment Policy Web Service
KB ID 0001250 Problem A client had moved a domain joined server into their DMZ, and while they had opened the correct ports for Domain Authentication on their firewall, no one had considered the certificates on the server which had expired, and could not be renewed. Some research, pointed me towards Certificate Enrolment Web Service. Its job is to let clients enrol and renew certificates, from either non domain joined machines, or...
URI Was Validated Successfully But there Was No Friendly Name Returned
KB ID 0001249 Problem When attempting to connect a host to a Certificate Enrolment Policy Server it worked but had the following complaint; WARNING: The URI “https://{Host-Name}ADPolicyPRovice_CEP_{Method}/service.svc/CEP” was validated sucessfully but there was no friendly name returned by the remote machine. Solution On your certificate enrolment policy server, open the Internet Information Servers (IIS) Management...
Certificate Enrolment – URI This ID conflicts with an Existing ID
KB ID 0001248 Problem When attempting to connect a host to a Certificate Enrolment Policy Server I got this error; The URI Entered above had ID : “{Random-GUID}”. This ID conflict with an existing ID Solution On your certificate enrolment policy server, open the Internet Information Servers (IIS) Management console. Expand {Server-Name} > Sites > Default Web Site > ADPolicyProvider_CEP_Kerberos, (yours may not end...
MAC TFTP Software (OS X )
Mac TFTP KB ID 0001247 Problem Every time I go to a networking event theres a sea of MacBooks in the audience, If techs like MacBooks so much why is there such a lack of decent Mac TFTP software? Solution The thing is, I’m looking at the problem with my ‘Windows User’ head on. When I have a task to perform I’m geared towards looking for a program do do that for me. OS X is Linux (There I said it!) Linux in a...
Cisco IOS ‘Crypto’ Unrecognized Command?
KB ID 0001246 Problem I was working on a Cisco 3750-G last week, and I was in the process of setting up SSH access. When I went to generate the crypto key and enable SSH, It fired an error at me. In fact it wouldn’t execute any crypto commands; Core-SW(config)#crypto ? % Unrecognized command Now I have seen this before, (but not for a while). You need to be running a K9 version of the code. A quick ‘show version’...