Cisco – LDAP AAA Error ‘AAA Server has been removed”
KB ID 0001271 Problem Seen while attempting to test AAA authentication via LDAP to a Windows domain Controller. Authentication test to host {IP-Address} failed. Following error occurred – ERROR: Authentication Server not responding: AAA Server has been removed Solution This is a terribly ambiguous error! What it means is that the ASA cannot bind to active directory, either because; The ASA bind account password is wrong. The...
Cisco Licence Differences LAN-Lite / LAN Base / IP Base / IP Services
KB ID 0001270 Problem Actually finding the answer to this question is far more challenging than it needs to be! As usual Cisco can change this on a whim so before you purchase any equipment it’s still a good policy to check on the feature navigator. Solution This is about the best reference I’ve found. Although anyone who can tell me what the correct Layer 2 differences between Enterprise Access and Complete Access are,...
Managing IE Settings via GPO
KB ID 0001269 Problem There used to be a GPO called “Internet Explorer Maintenance” that you could set your Internet Explorer settings, i.e. Proxy server settings, home pages etc. This has now gone, and has been replaced with a group policy preference. Solution From the Group Policy Management Console > Locate the OU containing the USERS you want to link the policy to and create a new policy, then give it a sensible...
macOS – Editing the Hosts File
KB ID 0001268 Another guest post from Daniel Newton Problem I’ve had windows for years; I knew the OS inside out. Recently, I switched to Mac. But I wondered how to edit the hosts file for my VPN connections and my servers. After some research, I found out how to do it and thought I will document it on PeteNetLive! 🙂 Solution Open a terminal session and type in the following command; Sudo nano /etc/hosts Note: I’m using nano for this...
Windows 10 Create a WMI Filter for Group Policy
KB ID 0001267 Problem I was messing around with some GPO’s for client today to replace ‘Edge’ as the default browser, (with IE11). To make the whole process more efficient, I wanted to use a WMI filter toapply the policy only to Windows 10 machines. Before this used to be simple enough, you just set the Windows version in a WMI query. But because it searches for a string e.g. 6.1 (for Windows 8.1), that’s...