Windows – Firewall Group Policy
Firewall Group Policy KB ID 0000979 Problem For everyone who simply does not disable the Windows firewall, then you need to be able to manage what ports are open on your machines. The simplest way to do this is via firewall group policy. This week I had to open TCP port 9503 on the local firewall of my McAfee Move Offload Servers. Below I will open that port on all my machines, but in production I will only apply the GPO to...
Windows Displaying a Logon Notice (legal notices)
Logon Notice KB ID 0000328 Problem It’s been a while but when I was asked my notes were seriously out of date .Should you with to enable this feature then do the following. Solution : Logon Notice Logon Notice Option 1 – via Domain Policy 1. On a domain controller, Start > administrative tools > Group Policy Editor > Either edit an existing policy or create a new one (Remember its a computer policy you need to...
Red Hat – Disable DNS Recursion (BIND)
Disable DNS Recursion KB ID 0000981 Problem I got a Tweet, to say the site was down. I checked and the VPS was off-line? So I powered it on and waited a few minutes. Linux is not one of my strongest technical areas so I did some Googling about what logs to check etc. When I looked in the var/log/messages log it was full of these, up to the point where it went down; Aug 7 03:51:52 MY-HOSTNAME named[490]: error (unexpected RCODE...
Cisco ASA – VPN Reverse Route Injection With OSPF
Reverse Route Injection KB ID 0000982 Problem Reverse Route injection is the process that can be used on a Cisco ASA to take a route for an established VPN, and populate/inject that route into the routing table of other devices in it’s routing group. In the example below, on the main site, we have a Layer 3 switch that’s routing all the 192.168.x.x networks, and we have an established site to site VPN to a remote site. To...
Cisco ASA Remote Management via VPN
ASA Remote Management KB ID 0000984 Problem It’s been ages since I has to do this, I usually just manage firewalls via SSH from outside. But I was out on a client site last week and needed to connect to to my ASA, so I simply connected in via AnyConnect; Note: The same procedure is applicable if you are an IPSEC VPN client, L2TP VPN client, or simply coming in over a site to site VPN link. And attempted to SSH, no joy, I tried...