Event ID 2003
KB ID 0000131 Problem Event ID 2003 The configuration information of the performance library <path to dll> for the <servicename> service does not match the trusted performance library information stored in the registry. The functions in this library will not be treated as trusted. Usually afer a service pack – asp, www and ftp services need to be reset. Solution Drop to command line and issue these commands (or...
Event ID 1812
KB ID 0000127 Problem The Intersite Messaging service failed to start due to the following error: The Service did not respond to the start or control request in a timely fashion AND: The description for Event ID {1812} in Source {NTDS Inter-site Messaging}cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the=20...
Event ID 1525
KB ID 0000270 Problem Windows has detected that Offline Caching is enabled on the Roaming Profile share – to avoid potential profile corruption, Offline Caching must be disabled on shares where roaming user profiles are stored. Pretty self explanatory – Offline caching is turned enabled on Windows shares by default, for shares that have profiles in them this needs disabling. Solution 1. The error will tell you the...
Event ID 1311
KB ID 0000126 Problem Event ID 1311 Solution The Knowledge Consistency Checker (KCC) has detected problems with the following directory partition. Directory partition: CN=Configuration,DC=domainname,DC=co,DC=uk There is insufficient site connectivity information in Active Directory Sites and Services for the KCC to create a spanning tree replication topology. Or, one or more domain controllers with this directory partition are unable...
Event ID 1206 and 1204
KB ID 0000125 Problem Event 1206 and 1204 Solution Drive Array Accelerator Battery Failed. The array accelerator board attached to the array controller in Slot 3 is reporting a battery failure. and / or Drive Array Accelerator Status Change. The array accelerator board attached to the array controller in Slot 3 has a new status of 4. (Accelerator status values: 1=other, 2=notConfigured, 3=enabled, 4=tmpDisabled, 5=permDisabled) The...