Transferring Certificates to Exchange 2010
KB ID 0000264 Problem As a rule most of my clients use self signed certificates, (even though you can buy certs cheap as chips these days). If you have paid for a certificate I can see why you would want to transfer it to the new Exchange box, though if your using self signed certificates, it’s a simpler task to create a new one. But I was asked, and what you guys ask for, I will work out how to do 🙂 Solution Export Certificate...
Event ID 9690
KB ID 0000303 Problem Event ID 9690 ‘{storage group name}Mailbox Store (Server name)’: The logical size of this database (the logical size equals the physical size of the .edb file and the .stm file minus the logical free space in each) is {x} GB. This database size has exceeded the size limit of {x} GB. Seen on Exchange 2003 (Including SBS 2003), Note you need to install Exchange 2003 Service Pack 2 before you can...
Exchange 2003 – ActiveSync Stops working after IP change
KB ID 0000345 Problem My colleague swapped over one of our clients to a new IP range last week, all went well except ActiveSync stopped working on the clients phones, it took a while for the penny to drop. But this problem was caused by the “fix” for the “Active Sync Support Code:85010014” that’s outlined in MS KB817379. You need to grant access to the servers new IP address. Solution 1. Lets make sure...
Exchange 2003 – NDR ‘This message is too large to send.’
KB ID 0000620 Problem An NDR is received by someone trying to send you an email that is too big, this is an example of what they get sent back to them. Delivery has failed to these recipients or groups: Recipients Email Address This message is too large to send. To be able to send it, make the message smaller, for example, by removing attachments. Diagnostic information for administrators: Generating server: receiving server name...
Exchange – 4.5.1. 4.4.0 Primary Target 4.2.1 unable to connect to alternative host
KB ID 0000790 Problem My colleague Allen was doing an Exchange 2003 to 2010 migration today, and things were not going well, mail refused to flow from the Exchange 2003 server to the Exchange 2010 server (it flowed from 2010 to 2003 without error). During migrations that’s not unusual, and removing and recreating the routing groups usually fixes it, but he had done that. Mail was sat on the Exchange 2003 Server outbound queues on the...