AAD Contains Another Object With The Same DN
KB ID 0001638 Problem I’ve seen this a few times now, I’ve had users that will not sync from Active Directory to Azure Active Directory (Office 365). When you look to see why, you will see something like; The Connector {Your-Domain}.onmicrosoft.com – AAD contains another object with the same DN which is already connected to the MV. Note: For the uninitiated, DN is Distinguished Name, and MV is MetaVerse. If you...
Resizing (Shrinking) Drives With VMware Standalone Converter
KB ID 0000185 Problem Using: vSphere 6.7 and VMware Standalone Converter Version 6.2.0 I’m performing this procedure on vSphere 6.7, back ith the release of vSphere 5, This process changed, with vSphere 4 and VI3, you had to install VMware Converter on the vCenter Server then download and enable the plugin in your VI client software (like this). VMware now only has the “standalone converter”, so now you DONT install...
How Do I Find/Change My IP Address?
KB ID 0000208 What’s an IP address? An IP address is the address used on a network to find your PC, Server, Laptop, or Printer etc. It’s the networking equivalent of your house number and post code (or Zip Code for visitors from over the pond). Do you want your PUBLIC or PRIVATE IP address? As we started to run out of addresses, there were a number of solutions that we came up with, one you will see below (DHCP) the other...
Cisco ASA Site To Site VPN IKEv1 “Using CLI”
Do the same from ASDM KB ID 0000050 Problem Note: This is for Cisco ASA 5500, 5500-x, and Cisco Firepower devices running ASA Code. Note: This is quite an OLD POST, only use these instructions if you need to create a VPN tunnel that uses IKEv1, (i.e. The other end is not a Cisco ASA, or it’s a Cisco ASA running code older than 8.4). You can still use an IKEv1 tunnel of course, so this article is still valid, it’s just...
Cisco ASA Site to Site VPN ‘Using ASDM’
KB ID 0000072 Problem Note: This is for Cisco ASA 5500, 5500-x, and Cisco Firepower devices running ASA Code. Do the same from command line Below is a walk-through for setting up one end of a site to site VPN Tunnel using a Cisco ASA appliance – Via the ASDM console. Though if (like me) you prefer using the Command Line Interface I’ve put the commands at the end. click image for full subnet information Solution VPN Setup...