Install and Use a Windows TFTP Server
Windows TFTP KB ID 0000063 Problem Note: If you are using a mac, then seee the following link; MAC OS X TFTP Software There are many free tftp applications, my personal favourite is 3Cdaemon, as it also has a built in syslog server and an FTP server. heres how to install it on your computer. There are a number of places you can download 3CDeamon or just CLICK HERE Deploy a windows TFTP Server Download the files and extract them to...
ASDM on Windows 10: ‘Cannot find Javaw.exe?’
KB ID 0001478 Problem Windows 10 machine, (with Latest Java installed), while attempting to launch the ASDM you see; Windows cannot find ‘javaw.exe’. Make sure you typed the name correctly, and then try again. Solution I should have fixed this a lot quicker than I did, because the error message was a lot more descriptive in older versions of Windows and the ASDM! This is the same problem seen on Windows 8. You still need...
Cisco ASA – Allow Remote Management
KB ID 0000173 Problem Quite a while ago I wrote the “Connecting to and managing Cisco firewalls” article, which is still pretty complete, but I’ve been asked on a few occasions, “How do I actually configure the firewall to allow remote administration via, SSH, or HTTPS/ASDM, or Telnet If you have no network connection to the firewall, then you will need to connect via console cable (CLICK HERE). Solution...
Cisco ASA No Debug Output?
KB ID 0001477 Problem I see this get asked in forums A LOT, typically the poster has another problem they are trying to fix, someone has asked them to debug the problem and they cant see any debug output. Solution Firstly you need to understand what logging is, and how debugging fits within it. (Bear with me, this is good knowledge to have). The firewall saves logs in syslog format, and there are 8 Levels of logs, the one with the...
ASA Connection Error: ‘The First Key-Exchange Algorithm’
KB ID 0001476 Problem When attempting to connect to a Cisco ASA firewall via SSH you see the following error; The first key-exchange algorithm supported by the server is diffie-hellman-group1-sha1, which is below the configured warning threshold. Do you want to continue with this connection? Clicking ‘Yes’ will let you connect. Solution When connected, execute the following commands; conf t ssh key-exchange group...