Troubleshooting Phase 2 Cisco Site to Site (L2L) VPN Tunnels
KB ID 0000625 Problem It’s been over two years since I wrote Troubleshooting Phase 1 Cisco Site to Site (L2L) VPN Tunnels. I’ve always meant to come back and write the ‘Phase 2’ article but never got around to it. This article is NOT intended to be a ‘fix all” for phase 2 problems, it’s designed to point you in the right direction to locate the source of the problem. Solution Here’s my...
VPN Error – ‘CRYPTO-4-RECVD_PKT_NOT_IPSEC’
KB ID 0000936 Problem While setting up a simple site to site to site VPN, I was unable to get ISAKMP phase 1 to establish. When I had a look on the device at the far end. I saw this error logged in the console, every time I tried to bring up the tunnel. *Mar 1 00:21:42.811: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec’d packet not an IPSEC packet. (ip) vrf/dest_addr= /192.168.2.3, src_addr= 192.168.1.2, prot= 1 Solution After about 40...