Connecting to and Managing Cisco Firewalls
Also see “Allow Remote Management” KB ID 0000075 Problem To connect to and manage a Cisco firewall you need three things, To be in possession of a password, (and in some cases a username). Have the ‘Method of Access granted to you’ (or have physical access to the firewall). Know a ‘Method of Access’ to the firewall for management. Cisco Firewall Passwords Unless your firewall is brand new (in which...
Cisco Catalyst Switches – Set a Management IP and Allow Telnet and Web Management
KB ID 0000614 Problem If you want to manage your Cisco Catalyst switch it’s not always practical to plug a console cable in to change its settings or monitor what it is doing. Putting an IP address on it and enabling remote management via Telnet or from your web browser is a better alternative, particularly if you have a lot of switches. Solution Enable Telnet Management on Cisco Catalyst Switch 1. Connect to the Switch using a...
Backup and Restore a Cisco Firewall.
KB ID 0000076 Problem There are many different versions of PIX and ASA Firewalls. So, if you want to get a backup of the configuration and save it elsewhere, (so in the event of a failure, (or more likely someone tinkering and breaking the firewall)). you will be able to recall and restore that configuration. By far the easiest method is to use a TFTP server – and it works on ALL versions, so learn it once and use it many...