HP and Cisco – VLANs and Trunks Confusion!
KB ID 0000741 Problem When I first started in IT, I went and did my Cisco CCNA. So I learned that to connect Cisco switches and pass VLAN traffic between them, I needed to create a ‘Trunk’ to pass the VLAN traffic. Fast forward a few years, and I now work for an HP reseller. Very early on I came to realise that what HP called a ‘trunk’ was very different from what I had been taught. Below is an article I did a...
Configuring Multiple Cisco Switch Ports at the Same Time
KB ID 0001009 Problem If you have the same configuration that needs to be placed on multiple ports, then doing each one individually can be time consuming. To save time use the ‘interface range’ command. Be aware this command is only available on devices running IOS versions newer than 12.0(7)XE, Release 12.1 E, and Release 12.1(5)T. Solution 1. From configure terminal mode, I want to apply the same configuration to...
Cisco Catalyst – Configure Ports for VMware ESXi NICs using VLANS
KB ID 0001065 Problem If you don’t need different virtual machines to be in different VLANS on your vSphere/ESXi servers then you probably just connect everything together and it all works fine. I was trying to carve off some hosts into their own VLAN today, and setup a new vSwitch. or if you prefer to work in the fat client. Now you can see (above), I’ve presented one physical NIC to this vSwitch (vmnic1). This is...
Connecting to and Configuring Cisco Routers with ‘Cisco Configuration Professional’
KB ID 0000512 Problem It’s not often I work on Cisco routers, but as I tend to do most of the Cisco ASA Firewalls, I’m the unofficial “Cisco Guy”. Which is fine until someone wants a router or some complex switching, then I need to do some heavy duty frowning. Last time I put in a Cisco router it was a baby Cisco 800 series (an 877W) so I assumed the 1921 ISR router I had to put in would be the same. Before I...
Cisco ASA 5500 – Configuring PPPoE
KB ID 0000831 Problem Until very recently I’d never had to configure PPPoE. Most of my clients in that sort of connection speed range have ADSL with a router provided by their ISP. A Router that connects via PPPoA usually. Here in the UK the main ISP’s (BT and Virgin) are busy rolling out FTTC connections that terminate with a ‘modem’ that presents an RJ45 socket. So without the need for a router, you can get...