WDS – Unattended file – Removing /Formatting Drive Partitions
Nov17

WDS – Unattended file – Removing /Formatting Drive Partitions

KB ID 0000490  Problem Over the last couple of years I’ve done a lot of imaging of School PC’s I don’t know why but they come with a myriad of different drive and partition configurations. Even big vendors like HP and Dell ship their machines with recovery partitions these days. If you are imaging with WDS this can cause a problem so what I usually want to do is remove all the partitions, create one big one that...

Read More

Update Global Address List Error “WARNING: The recipient “xxxxxMicrosoft Exchange System Objects/xxxxx” is invalid and couldn’t be updated

KB ID 0000516  Problem Seen when manually trying to update the Global Address List, with the following powershell command: Update-GlobalAddressList -identity ‘Default Global Address List’ Error: WARNING: The recipient “{your domain name}/Microsoft Exchange System Objects/{A Public Folder Name}” is invalid and couldn’t be updated. or Error: WARNING: The recipient “{your domain name}/Microsoft...

Read More
Juniper SRX – ‘The Routing Subsystem Is Not Running’
Nov17

Juniper SRX – ‘The Routing Subsystem Is Not Running’

KB ID 0001045  Problem While trying to deploy Solarwinds to monitor a Juniper SRX failover cluster, we were having no joy connecting to the management interface of the secondary/standby firewall. The management (fxp0) interface on the primary (node0) firewall we could get to OK. ] After jumping on the secondary firewall (via the console connection) we observed the following; error: the routing subsystem is not running Solution As you...

Read More
Update Cisco ASA – Directly from Cisco (via ASDM)
Nov17

Update Cisco ASA – Directly from Cisco (via ASDM)

KB ID 0000636  Problem Warning: Before upgrading/updating the ASA to version 8.3 (or Higher) Check to see if you have the correct amount of RAM in the firewall (“show version” command will tell you). This is VERYIMPORTANT if your ASA was shipped before February 2010. See the link below for more information. ASA – Memory Error (Post upgrade to version 8.3) Warning 2: Be aware, if you are upgrading to an OS of...

Read More