FortiClient: Unlicensed VPN access is available until..
KB ID 0001745 Problem I got an email from a client I deployed SSL VPN for, (a couple of weeks ago), one of his users was seeing this; Unlicensed VPN access is available until {Date} {Time} Solution: Unlicensed VPN access is available until… At first I was confused, unlike other vendors SSL VPN is not a licensed requirement? As it turns out in my instructions, I’d written ‘Download the Forticliet” when I...
FortiGate: SSL-VPN With FortiClient (AD Authenticated)
KB ID 0001725 Problem FortiGate Remote Access (SSL-VPN ) is a solution that is a lot easier to setup than on other firewall competitors. Here’s how to setup remote access to a FortiGate firewall device, using the FortiClient software, and Active Directory authentication. This is what my topology looks like; Note: I’ve changed the FortiGates default management HTTPS port from 443 to 4433 (before I started). This was to let...
FortiGate: Change the HTTPS Fortigate Management Port
KB ID 0001723 Problem Like all firewalls that have ‘web management’ the default ports are 80 and 443 for insecure and secure management. IF you have secure (https) management on the outside interface of your firewall on the normal TCP port of 443. Then you can’t use the same interface to terminal SSL-VPNs. So you will need to change the FortiGate Management Port. You can set SSL-VPN to use a different port of course,...
AnyConnect – ‘VPN establishment capability for a remote user..
KB ID 0000546 Problem If you connect to to a client via RDP then try and run the AnyConnect client, you will see one of these errors; VPN establishment capability for a remote user is disabled. A VPN connection will not be established VPN establishment capability from a Remote Desktop is disabled. A VPN connection will not be established This, behaviour is default, and despite me trawling the internet to find a solution (most...
Cisco ASA AnyConnect VPN ‘Using ASDM’
KB ID 0000069 Problem Note: This is for Cisco ASA 5500, 5500-x, and Cisco Firepower devices running ASA Code. Below is a walk through for setting up a client to gateway VPN Tunnel using a Cisco Firepower ASA appliance. This was done via the ASDM console. The video was shot with ASA version 9.13(1) and ASDM 7.13(1). Suggestion: If you are setting this up for the first time, I would suggest setting it up to use the ASA’s LOCAL...