IBM Storwize: Get The Serial Number
KB ID 0001663 Problem I’ve got a client that has a couple of Storwize V5000 storage arrays. I needed to get the serial numbers for them today, but I could not find them in the GUI? Solution As usual things are much simpler at command line, SSH into the storage array and simply use the following command; lsenclosure Note: As you can see, I’ve got one Controller (with the cans in it,) and one expansion shelf. The first part...
Cisco ASA – Password Recovery / Reset
KB ID 0000572 Problem Note: This procedure allows you to reset the password WITHOUT LOSING THE CONFIG You need to access a Cisco ASA device and do not have the passwords, there can be lots of reasons for this, lack of good documentation, bought a second hand firewall, the last firewall admin never told anyone etc. This method does require physical access to the ASA, a console cable, and a machine running some terminal emulation...
Ubuntu – Managing Cisco Devices via Serial / Rollover Cable
KB ID 0000400 Problem A while back I ran though “Managing Cisco ASA devices via the ASDM with Ubuntu”, I prefer to work at command line, with a new firewall my only choice is via the console port, In a windows environment I can fire up Hyperterminal and I’m away. With Linux there a couple of things to do first. Solution Step 1 (Get the Serial / RS232 / COM Port working) As pictured above, this is being done on my...
Windows – Changing the Unlock Code and Activating
KB ID 0000667 Problem Some versions of Windows 8 (Windows 8 Pro for example) ask for the unlock code as soon as you install them, I installed Windows 8 Enterprise on my PC at home today, and I couldn’t even change my user photo, because Windows hadn’t activated. When I tried, this is what happened. Solution As I had not yet installed a Windows unlock code, it’s safe to assume it had it’s in built KMS code, so...
Install and Configure an HP UPS Network Module
KB ID 0000813 Problem I installed one of these a couple of weeks ago, and there’s some good documentation with the module itself so installing it into the UPS and giving it an IP address was easy, getting the right client software to talk to it was a pain. Solution Configure the Network Module 1. Physically install the module in the UPS, it’s fixed with two screws and you can install it with the UPS powered on. 2. It takes a...